 |
 |
 |
|
|
|
Flux-Cored Wires for Welding
|
GOST 26271-84 2,2PG44-A3N SFA/AWS E 70T-1 EN758-T42 For semi-automatic welding of carbon steel grades with the carbon content of not more than 0,25% and low-alloyed steels in the protective atmosphere of carbon dioxide in flat and horizontal positions at reverse-polarity direct current.
|
GOST 26271-84 2,2PG44-A1G SFA/AWS E 70T-1 EN758-T46 For semi-automatic welding of carbon steel grades with the carbon content of not more than 0,25% and low-alloyed steels in the protective atmosphere of carbon dioxide at reverse-polarity direct current in the environment of production shop or installation site.
|
|
|
GOST 26271-84 2,8PS44-A2N SFA/AWS E 70T-4 EN758-T46 For mechanized of low-carbon and low-alloyed steel grades in flat position at reverse-polarity direct current. The wire is recommended for welding of metal with the thickness of more than 5 mm
|
GOST 1,2PGH8 EN758-T46 SFA/AWS E 71T-9 For mechanized submerged welding in all welding positions of low-carbon and low-alloyed shipbuilding structural steel grades of normal and extremely high strength.
|
|
|
GOST 0,8PS SFA/AWS E 71T-3 For semi-automatic welding of low-carbon and low-alloyed steels with the thickness of up to 5 mm
|
GOST 2,8PS34-AK EN758-T35 SFA/AWS E 70T-3 For mechanized welding, no more than four layers, of low-carbon structural steels in flat weld position at reverse-polarity direct current.
|
|
|
GOST 26271-84 1,2PG44-A2U EN758-T46 SFA/AWS E 71T-9 For gas shielded welding of low-carbon and low-alloyed structural steel grades in all welding positions.
|
|
|
|
 |
|
 |