UONI-13/45 (УОНИ-13/45)

GOST 9466, GOST 9467 Е41 2(4) – B20 SFA/AWS E6015 EN E 35 3 В 22

For manual arc welding of heavy duty constructions from carbon and low-alloyed steel grades, when weld metal is required to possess very good plasticity and impact toughness.

UONII-13/45 A (УОНИИ-13/45 А)

GOST 9466, GOST 9467 Е43 3 B20 SFA/AWS E6015 EN E 35 3 В 2 2

For welding of heavy duty constructions from carbon and low-alloyed steel grades with the tensile strength of up to 590 MPa (60 kgf/mm²) in all positions, except vertical down.

UONI-13/55 (УОНИ-13/55)

GOST 9466, GOST 9467 Е51 4 B20 SFA/AWS E7015 EN E 38 3 B 2 2

For welding of heavy duty constructions from carbon and low-alloyed steel grades, when weld metal is required to possess very good plasticity and impact toughness.

MR-3 (МР-3)

GOST 9466, GOST 9467 E 43 0(3) R26 SFA/AWS E 6013 EN: E 35 2 R 1 2

For welding of heavy duty constructions from carbon steel grades with the carbon content of up to 0,25% in all positions, except vertical down.

ANO-4 (АНО-4)

GOST 9466, GOST 9467 E 43 0(3) R21 SFA/AWS E6013 EN: E 35 2 R 1 2

For welding of constructions from carbon steel grades with the content of carbon of up to 0,25%

OZS-12 (ОЗС-12)

GOST 9466, GOST 9467 E 43 2(3) R12 SFA/AWS E6013 EN: E 35 2 R 1 1

For welding of carbon and low-alloyed structural steel grades with the carbon content of up to 0,25%

ANO-4I (AHO-4И)

GOST 9466, GOST 9467 E 43 0(3) RA24 SFA/AWS E6013 EN: E 35 2 RА 1 2

For welding of constructions from low-carbon steel grades with the carbon content of up to 0,22% in all positions, except vertical down.

New

MR-3A (MP-3A)

GOST 9466, GOST 9467 E 43 2(3) R11 SFA/AWS E 6013 EN: E 35 2 R 1 1

For welding of constructions from carbon steel grades in all welding positions.

ANO-36 (AHO-36)

GOST 9466, GOST 9467 E 43 2(3) RC13 SFA/AWS E6013 EN: E 35 2 RС 1 1

For welding in all positions of ordinary and heavy duty constructions from low-carbon steel grades.

New

UONI-13/55S (УОНИ-13/55С)

GOST 9466, GOST 9467 Е51 4 – B20 SFA/AWS A5.1:E7015 EN: E 38 0 В 2 2 H 1 0

For welding of heavy duty constructions from carbon and low-alloyed steel grades, when weld metal is required to possess very good plasticity and impact toughness, especially at low temperatures.

TSCH-4 (ЦЧ-4)

GOST 9466-75 Е23 12 B20 SFA/AWS E309-15 EN E 38 0 В 2 2 H 1 0

For cold welding of structures of high strength cast iron with a spheroid graphite and of grey cast iron with lamellar graphite and their combinations with steel, for repairing of defects in castings and for preliminary depositing of the first 1-2 layers upon worn out cast iron parts as preparation for subsequent depositing with special types of electrodes.

T-590 (T-590)

GOST 9466-75 10051-75 Е23.12 B20 SFA/AWS E309-15 EN: E 38 0 В 2 2 H 1 0

For hardfacing on materials with very high strength and ductility

T-620 (T-620)

GOST 9466-75 10051-75 Е23.12 B20 SFA/AWS E309-15 EN: E 38 0 В 2 2 H 1 0

For hardfacing on materials with moderate strength and ductility