Catalogue

Contacts

Products by Application

Products by Type

Flux-Cored Wires for Hard-Facing

PP-Np-18H1G1M-Т-F-3,6(2,8)-2 (ПП-Нп-18Х1Г1М-Т-Ф-3,6(2,8)-2)

GOST 26101-84

For submerged arc hard-facing, using flux AN-26P producing a layer of special steel onto components, subject to abrasive wear.

PP-Np-200H15S1GRТ-N-S-3,2-2 (ПП-Нп-200Х15С1ГРТ-Н-С)

GOST 26101-84

For mechanized hard-facing of work pieces, subject to abrasion.

PP-АN180М-Т-G-2,0-1 (ПП-АН180М-Т-Г)

For mechanized hard-facing in the atmosphere of carbon dioxide producing a wear-resistant layer of steel at restoration of components and units of railway transport.

PP-Np-35V9HZSF-Т-F-3,6-2 (ПП-Нп-35В9Х3СФ-Т-Ф)

GOST 26101-84

For mechanized hard-facing producing a layer of structural steel on surfaces, which are subject to a combination of high temperature and pressure or exposed to strong abrasion.

PP-Np-30H5G2SМ-Т-S-1,6-2 (ПП-Нп-30Х5Г2СМ-Т-Ф) PP-Np-30H5G2SМ -Т-F-2,8-2 PP-Np-30H5G2SМ -Т-F-3,6-2

GOST 26101-84

For mechanized hard-facing producing a layer of special steel onto surfaces, subject to strong abrasion.

PP-Np-14GST-Т-S-3,0-2 (ПП-Нп-14ГСТ-Т-С-3.0-2)

GOST 26101-84

For mechanized hard-facing producing a layer of special steel onto components, subject to strong abrasion.

PP-Np-25H5FMS-Т-F-3,6-2 (ПП-Нп25Х5ФМС-Т-Ф)

GOST 26101-84

For mechanized hard-facing producing a layer of structural steel onto surfaces, subject to a combination of temperatures of up to 600 °C and strong abrasion.

PP-Np-80H20R3Т-N-S-3,2-2 (ПП-Нп-80Х20Р3Т-Н-С)

GOST 26101-84

For mechanized hard-facing producing a layer of special steel onto surfaces, subject to strong abrasion.

PP-Np-35V9HZSF-Т-G-1,6-2 (ПП-Нп-35В9ХЗСФ-Т-Г)

GOST 26101-84

For mechanized hard-facing producing a layer of structural steel on surfaces, which are subject to a combination of high temperature and pressure or exposed to strong abrasion.

PP-Np-19GST-Т-S-3,0-2 (ПП-Нп-19ГСТ-Т-С)

GOST 26101-84

For mechanized hard-facing producing a layer of special steel onto components, subject to strong abrasion.

PP-TP-2-Т-2,0-2 (ПП-ТП-2-Т)

For spray coating with the method of electric arc metallizing of work pieces, subject to abrasion.

PP-PМ-6-1,6 (ПП-ПМ-6)

For spray coating with the method of activated arc metallizing for restoration and hardening of car and equipment components, subject to dry and wet abrasion.

PP-SPZ-М1-Т-2,2 (ПП-СП3-М1-Т)

For spray coating with the method of electric arc metallizing.